Candle studio at dusk
Warm the wax. Float the discs. Let the room Glow
Afterglow by Lindsay LLC is a small hand poured candle studio working from 1902 E 700 S Unit A314, Clearfield - 84015-2890, United States (US), where every batch is weighed, wicked and finished by hand at the bench. We blend scent like a slow afternoon, pour in short runs so the wax settles evenly, and teach the care steps that keep a poured piece burning clean for months rather than days. See what happens at the pour bench →
Book a studio visit →The studio
A bench built for slow candle work
The studio began as a single melter on a kitchen counter and grew into a working bench with a wax kettle, a scent cabinet and a long shelf of resting pieces. Afterglow Lindsay built the studio around one idea: a candle is a small piece of architecture, and it deserves to be poured with the same care as anything else made to last.
We keep the runs short on purpose. Each small batch pour produces a numbered set of poured pieces, and once the set is finished we start fresh rather than stretching a batch to fill an order. That habit keeps the wax honest, the scent bright and the finish clean. Visitors often tell us the studio smells like the ten minutes after sunset, and we take that as the highest compliment available.
Everything on the shelves is made under one roof in Clearfield. There are no outside fillers, no mystery blends and no shortcuts hidden behind a label. If you want to know what went into a pour, read the sheet on the shelf or ask us at the bench. The answer is always the same length: the wax, the wick, the scent and the hands.
On the shelves
Six services resting on the run
Each shelf holds two pieces. The name on the slab tells you what the bench does; the note under the plank tells you why it matters.
Scent Blending Sessions
View service →Small batch pours run in numbered sets of twelve to thirty pieces, each one weighed to the gram and wicked by hand. Scent blending sessions are quiet two-hour appointments where you build a profile from our cabinet and take home the small test pour.
Wax Care Clinics
View service →Custom Label Painting
View service →Wax care clinics teach trim length, burn timing and the tunnel problem before it starts, in a short hands-on hour at the bench. Custom label painting turns the front of a poured piece into a small painted panel, mixed and applied in the studio so the finish belongs to the candle.
Studio Pour Nights
View service →Gift Set Assemblies
View service →Studio pour nights open the bench to small groups for an evening pour with the kettle warm and the shelf lamps low. Gift set assemblies pair poured pieces with a card, a wick trimmer and a wrapped box, packed at the same table where the wax was poured.
Winter gift set window The winter gift set window opens on the first week of November, and poured sets are reserved by studio appointment only - write to the bench to hold a set before the shelf clears.
0
Poured pieces in a standard small batch, weighed and wicked by hand.
0
Scent families in the studio cabinet, from dry cedar to salt air.
0
Years of bench practice behind the pour schedule.
How the bench works
From the kettle to the resting shelf
A poured piece moves through the studio in a fixed order, and the order is what keeps the finish consistent from one batch to the next. Nothing is rushed to meet a date. If the wax needs another hour to settle, the shelf waits, and so do we.
- Weigh and melt. The wax is weighed on the bench scale and melted low, never scorched, so the pour stays creamy rather than brittle.
- Blend at temperature. Scent goes in at the moment the wax holds the note instead of flashing it off, which is where most home setups lose the throw.
- Wick and pour. Each vessel is wicked, pinned and poured in a short run, then left perfectly still for the first set.
- Rest and cure. Poured pieces rest on the shelf for a full cure before they are tested, labelled or packed for a gift set.
- Trim and test. The first burn of every batch is watched at the bench to check pool width and wick length before release.
- Label and record. The batch sheet records the wax, the scent ratio, the wick and the cure date, and the label carries the same story forward.
Notes from the bench
What people ask before their first pour
Most first questions are about timing. A small batch pour usually takes about six weeks from the day we melt to the day a piece is ready to leave the shelf, because the cure is the part that cannot be hurried. If you need a set for a specific date, tell us at the start and we will work backward from the shelf date rather than forward from the kettle.
The second question is about scent strength. A strong throw is not the same as a heavy hand with the scent bottle. We blend to a measured ratio, then test the first burn in the studio before the batch is released. If a note reads flat at the bench, it never reaches the shelf, and the batch is reworked rather than sold with a warning.
The third question is about care. A poured piece burns best when the first burn reaches a full pool across the top, when the wick is trimmed to a short length before every light, and when the room is free of a strong draft. The wax care clinic covers all three in an hour, and the short sheet that leaves with every piece repeats them.
The fourth question is about custom work. We take custom label painting and gift set assemblies through the studio directly, and we keep a written note of the colours, the card wording and the pack order so a repeat order lands the same way twice. Reach us at office@afterglowlindsay.mom or on +12798889925 to start that conversation.